1. Meidai information
A U.S. Authorized Agent is an organization or individual authorized under U.S. law to conduct business on behalf of an enterprise or individual. The U.S. Authorized Agent's responsibilities include communicating with U.S. regulatory authorities, representing companies outside of the U.S. in exchanges with the U.S. market, and ensuring that products comply with relevant laws and regulations. Note: The address of the U.S. Authorized Agent must be a valid, detailed and contactable U.S. address.
2、U.S.A. Baby Bath Chair Labeling Warning Requirements
A baby bath chair is an item used to support an infant in a tub, sink, or similar bathing facility, including front and rear seats, and is used by a caregiver when bathing an infant.
1) Use suction cups as a connection mechanism to fix the baby bath chair
As required by relevant U.S. regulations, baby bath seats that use suction cups as an attachment mechanism and are not intended to be used on any type of non-slip surface should have the following warning prominently and permanently labeled on the product:
In addition to the above warning labels, the age and developmental stage of the recommended user should be stated additionally on the package:
- Product is suitable for babies able to sit up unassisted (approximately 5 months of age).
- STOP using when baby begins pulling to a standing position (approximately 10 months of age).
NOTE: If the manufacturer also does not intend to use the product on other types of surfaces, the following additional warnings should also be included: - Warning: Do not use this product on (list other types of surfaces that are not intended).
(2) Baby bath chairs that are not secured by suction cups as a connecting mechanism
According to U.S. regulations, baby bath seats that do not use suction cups as an attachment mechanism should display the following warning labels on the product and packaging, with specific requirements as follows:
Mark the following warning symbols prominently and permanently on the product:
In addition to the above warning labels, the age and developmental stage of the recommended user should be additionally stated on the package:
- Product is suitable for babies able to sit up unassisted (approximately 5 months of age).
- STOP using when baby begins pulling to a standing position (approximately 10 months of age)
3、U.S.A. Crib Mattresses
1) Warning label for non-full-size crib mattresses
As required by U.S. regulations, aftermarket mattresses for non-full-size cribs need to be permanently labeled with a warning label and, if the mattress is used in an aftermarket mattress for a rigid side rectangular non-full-size crib, a statement of size needs to be added to the warning label.
Aftermarket mattresses for non-full-size cribs require a warning label permanently marked on the mattress (as shown in Figure 1). Aftermarket mattresses are mattresses that are sold by a third party or other channel after the original sale, rather than directly by the original manufacturer. These mattresses may be sold as replacements, spares or upgrades. Aftermarket mattresses are usually commodities that exist to fulfill a different consumer need or to replace a damaged mattress.
If the mattress is being used in the aftermarket for a rigid side rectangular non-full size crib, an additional size statement will need to be added to the Warning Label (fill in the blanks as shown in the penultimate paragraph of Figure 2). A rigid side rectangular part-size crib is a smaller size crib with sides made of a solid material and a rectangular shape rather than a standard full-size crib. This type of crib is often used to meet space constraints or other specific needs.
Attention:
- Labels must be in English;
- The height of the safety warning symbol and the word "WARNING" should be at least 5 mm and the capital letters of the rest of the text should not be less than 2.5 mm;
- Text should be left-aligned, and single-line text messages can be left-aligned or centered;
- The text in each column should be organized in a list or outline format, and the precautionary (avoidance of harm) statements should be preceded by bullets. If paragraph format is used, multiple prevention statements should be separated by bullets.
- The Aftermarket Mattress should have the following appropriately filled in on the italicized portion of the example diagram above:
- All warnings for increase in native producers
- Assembly/installation instructions provided on the original mattress
- Specific brands and models of products to be used
- Aftermarket Mattresses for Rigid Side Rectangular Non-Full Size Cribs - The statement in the penultimate paragraph of Figure 2 should be displayed exactly as it appears (fill in the blanks with specifics).
- Cartons and other materials used exclusively for the transportation of mattresses are not considered retail packaging. If the warnings and instructions are labeled on the mattress and are fully visible through the retail package, they need not be marked on the retail package. If the foregoing conditions are not met, the same warnings and instructions need to be marked on the retail package.
2) Full-size crib mattress warning labels
As required by applicable U.S. regulations, full-size crib mattresses should have the following warning label permanently marked on the mattress. If the warnings and instructions are already labeled on the mattress and can be seen in their entirety through the retail packaging, the same warnings and instructions need not be labeled on the retail packaging.
Attention:
- Labels must be in English;
- The height of the characters of the safety warning symbols and WARNING shall be at least 5 mm, and the capital letters of the remaining text shall not be less than 2.5 mm;
- The text is left-aligned. Single-line text messages can be left-aligned or centered;
- The text in each column should be arranged in a list or outline format, with the prevention (avoidance of harm) statement preceded by a bullet. If paragraph format is used, multiple prevention statements should be separated by bullets;
- Cartons and other materials used exclusively to transport mattresses are not considered retail packaging.
4、Baby walker
As required by U.S. regulations, the following warning statement should be prominently and permanently displayed on the infant walker. The statement should contrast sharply with the background, use sans-serif fonts, and include the following:
(1) The warning shall include the following:
(2) The additional warning should address the following:
- Use only on flat surfaces free of objects that could cause the walker to tip over.
- To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.
(3) A separate stairway warning label (placed so that it is visible when the consumer places the child in the walker) shall meet the following requirements:
Attention:
- Safety warning signs and the word "WARNING" shall be no less than 0.2 inches (5 mm) in height, black in color with an orange background color, and surrounded by a black border.
- Capital letters in the rest of the text should be no less than 0.1 inches (2.5 mm) in height, black in color, and white in background color.
5. American Cradle Warning Labels
In accordance with U.S. law, the following warning statement shall appear on each Cradle product, and the warning statement shall be clearly, conspicuously, and permanently marked in contrasting color, sans serif typeface:
The following additional warning instructions must be visible when the pad is removed:
Attention:
(1) For the green part of the above marking, please fill in the maximum weight recommended by the manufacturer in [ ] according to the actual condition of the product;
(2) The safety alert symbol and the word "WARNING" shall precede the warning text of each warning and shall not be less than 0.2 inches (5 mm) in height, with the remainder of the text in capital letters at least 0.1 inch (2.5 mm) in height, unless otherwise specified in (3);
(3) In the additional warning language, the words "SUFFOCATIONHAZARD" shall be displayed in bold letters no smaller than 0.4 inches (10mm) high, the words "lnfants have suffocated" shall be displayed in capital letters no smaller than 0.4 inches (10mm) high, and the rest of the text shall be in capital letters no smaller than 0.2 inches (5mm) high. The words "SUFFOCATIONHAZARD" shall be displayed in bold letters no smaller than 0.4 inches (10mm) high, the words "lnfants have suffocated" in capital letters no smaller than 0.4 inches (10mm) high, and the remaining text in capital letters no smaller than 0.2 inches (5mm) high.
6. U.S. crib warning labels
[Packaging Warning Label]
Under U.S. law, the primary display panel of each product's retail package should bear the following markings and statements:
In addition to Figure 1, the minimum age and maximum weight of the intended user should be indicated, with reference to the following expression:
NEVER use bed with children younger than _ months;
The user's maximum weight shall not be greater than _ lbs ( _kg).
Attention:
(1) The maximum recommended mattress thickness shall be entered on the underlined line, with the recommended maximum mattress thickness not to exceed 6 inches (150 mm)
(2) Formatted as shown, bold text should be at least 0.2 inches (5mm) high, the rest of the text should be at least 0.1 inches (2.5mm) high
(3) Minimum age must not be less than 15 months and maximum weight must not be greater than 50 pounds (22.7 kg)
[Product Body Warning Label
According to U.S. law, the following three warning statements should appear on every crib product:
Attention:
(1) The warning statement shall be conspicuously and permanently marked on the product and the entire contents of the warning statement shall be visible when the mattress is removed;
(2) Formatting and content should be as shown, with bold text at least 0.2 inches (5mm) in height and the rest of the text at least 0.1 inches (2.5mm) in height, using sans-serif fonts;
(3) Underline the maximum recommended mattress thickness, which should not exceed 6 inches (150 mm).
EN 
ZH_TW 
ZH