The EU Packaging Waste Recycling Directive has been implemented in a number of countries, such as the French EPR, the German EPR, the Spanish EPR and the Italian EPR, all of which have packaging regulations that require producers to take responsibility for the entire life cycle of their products.
Today's main with the seller is the Italian packaging regulations extension and product labeling specific details, full of dry goods, recommended collection of carefully read oh ~ ~!
According to the Italian Official Gazette n. 228, the effective date of Article 11 of the Decree-Law, which deals with the compliance with the requirements on package labeling, has been extended to July 1, 2022, which is the date when the Decree-Law will come into force.
That is, from July 1, 2022, all packages released for consumption in Italy must be properly labeled. The packaging labeling guide describes in detail the labeling methods and the necessary information on how to fulfill these obligations.
December 30, 2021, Act No. 30 December 30, 2021, No. 228, known as the "Millennium" DL.
11 suspension of the environmental labeling obligations for packaging until June 30, 2022, and the ability of operators in the industry to sell products without the new environmental labeling requirements In addition, within 30 days of the effective date of the regulation, the Secretary of Ecological Transformation signed a non-regulatory decree to adopt technical guidelines for the adoption of proper packaging labeling.
Therefore, the following groups of people need to fulfill the labeling requirement:
The "producer" must be identified by the alphanumeric code provided for in Resolution 97/129/CE and defined by Decree-Law 152/2006:
1, Packaging material suppliers, manufacturers, processors and importers of empty packages and packaging materials;
2. Traders, distributors, fillers, packaging users and whole package importers.
As of July 1, 2022, compliance with the relevant labeling requirements will be required and, according to Article 261, paragraph 3 of the statute, "any person who places on the internal market a package that does not comply with the labeling requirements shall be subject to a fine of between 5,200 and 40,000 euros."
Italy
Package Type and Package Labeling Requirements
Italian Packaging Labeling Requirements:, The type of environmental labeling can be structured according to its purpose, i.e.:
1、Packaging material labeling: Decision 129/97 / CE (mandatory for all packaging);
2. instructions requiring consumers to collect separately (mandatory for packaging used in B2C channels);
3. Voluntary environmental labeling to collect information.
There are seven categories of Italian packaging:
1. Plastic;
2. Paper and fiberboard;
3. Metal;
4. Wooden materials;
5. Textile materials;
6. Glass;
7. Composite materials.
The following chart shows the environmental labeling information for a single component package for end consumer use, for reference only:
Example:
"one" radical in Chinese characters (Kangxi radical 1)
NEWS
Steel Packaging
Example: Steel aerosol can with plastic lid
stupid (Beijing dialect)
NEWS
Aluminum Packaging
Example: Aluminum cans
surname San
NEWS
Paper Packaging
Paper, cardboard or corrugated cardboard?
The actual paper weight is up to 150 g/m2, while cardboard features weights of up to 600 g/m2 and up to 1100 g/m2.
Cardboard, on the other hand, is a paper product with a weight between paper and cardboard, which is defined as 250 to 450 grams per square meter. It can be noted that from the previous interval there are two clearly undefined areas.
For example, weights between 150 and 250 g/m2 and between 450 and 600 g/m2: In these ranges, the product may be contradictory to the paper or cardboard for the first compartment and the paperboard or cardboard for the second.
Definition of materials by weight
Example 1: Plastic window boxes cannot be separated manually.
Example ②: Paper bag with manually separable plastic window
Example ③: Baking cup paper
NOTE: It is best not to dispose of packages with consistent organic residues in a separate collection.
In this case, if your packaging meets the UNI 13432: 2002 standard, you may consider diverting the transfer to a different collection point for organic waste.
If biodegradable and compostable according to technical standard UNI EN 13432.
Example: ④ Cardboard box with plastic coating (weight 5% of total weight)
Example 3: Composite paper + steel tube, cellulose content < 60% of total weight
Example ④: Plastic + Aluminum Composite Bags (40% LDPE, 30% PET, 30% ALU)
Example ⑤: Glass and steel perfume bottles
Example 6: Composite blister for food supplements, aluminum + plastic base
8
NEWS
Textile Packaging
For the packaging of textile materials, reference is made to Annex V of Resolution 129/97/EC.
For textile materials not included in this table, and therefore different from "cotton" and "jute", the use of the TEX 62 code is considered appropriate, i.e. the first available number and does not identify any material.
These packages are not part of a separate domestic collection circuit, but refer to a dedicated collection circuit. It is therefore advisable to state the full "fabric" material in the code and to invite the consumer to check the requirements of their municipal authorities.
The Packaging Recycling Directive prevents over-packaging of products and ensures recycling of product packaging waste through the payment of corresponding environmental protection fees, achieving the effect of double protection of resources and the environment.
For EPR compliance registration in Europe, look no further than Green Circle!
For European VAT self-declaration, look for Green Circle!
Quickly place your number and report with one click!
EN 
ZH_TW 
ZH